Need help routing brake lines on 94 F350
#1
Need help routing brake lines on 94 F350
Hi all - I'm replacing the brake lines from the master cylinder to the front part of the frame and I can't remember how they were routed. I started on this project quite a while ago and then had to drop it. I thought I'd be able to remember how they went, but no such luck. In particular, there's a junction block with 3 ports (1 is not used) that bolts to the frame, and I just can't figure out where it's supposed to mount, and how the lines run from it to one other junction block.
What I really need are some pictures, which I obviously should have taken many of prior to disassembly. If anyone out there can help me with pictures I'd be very, very grateful.
Thanks, John D.
What I really need are some pictures, which I obviously should have taken many of prior to disassembly. If anyone out there can help me with pictures I'd be very, very grateful.
Thanks, John D.
Thread
Thread Starter
Forum
Replies
Last Post