Pro Trailer Yaw and Camera Install
Thread Starter
|
Junior Member
Joined: May 2026
Posts: 1
Pro Trailer Yaw and Camera Install
Looking for some assistance…
I have installed an LC3Z-1A189-CH kit on my 2022 250 Super Duty diesel for a trailer camera and Yaw sensor. I did buy the Yaw sensor in a separate sealed pack and have installed. I have the Pro Backup working but not the trailer camera provided in the LC3Z kit. The screen just displays “static”. I did replace the 7/4 pin with a 7/12 unit. I have used both the bed and bumper spare 12-pin connectors.
Any suggestions?
I have installed an LC3Z-1A189-CH kit on my 2022 250 Super Duty diesel for a trailer camera and Yaw sensor. I did buy the Yaw sensor in a separate sealed pack and have installed. I have the Pro Backup working but not the trailer camera provided in the LC3Z kit. The screen just displays “static”. I did replace the 7/4 pin with a 7/12 unit. I have used both the bed and bumper spare 12-pin connectors.
Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
JasonVL
Ford F-250 & Ford F-350
0
May 11, 2024 09:13 PM