Replacing headlights on 2015 F250
Thread Starter
|
Junior Member
Joined: Jul 2018
Posts: 1
Replacing headlights on 2015 F250
I pulled the grill and replaced both headlights. Two odd things:
1) On each side the upper of two screws (horizontal) was a little loose and would not tighten properly.
2) Is there a preferred way to stuff the wiring & connectors back in on the passenger side. If I just push it in the way it wants to go some of the wires are bent at 90 degrees.
1) On each side the upper of two screws (horizontal) was a little loose and would not tighten properly.
2) Is there a preferred way to stuff the wiring & connectors back in on the passenger side. If I just push it in the way it wants to go some of the wires are bent at 90 degrees.
Thread
Thread Starter
Forum
Replies
Last Post
