Focus 2012 Titanium, Camera grid lines missing
Thread Starter
|
Junior Member
Joined: Jun 2023
Posts: 3
Focus 2012 Titanium, Camera grid lines missing
Hi all.
Since I disconnected my battery to do some work on the steering wheel and airbag the park assist lines on the screen have gone missing. Camera comes on as normal, front and rear sensor work but no lines or reg/green blocks as before.
Ive update the SYNC to the latest version too using the Ford downloaded file from Ford website
Any ideas please. Many thanks
Since I disconnected my battery to do some work on the steering wheel and airbag the park assist lines on the screen have gone missing. Camera comes on as normal, front and rear sensor work but no lines or reg/green blocks as before.
Ive update the SYNC to the latest version too using the Ford downloaded file from Ford website
Any ideas please. Many thanks
Junior Member
Joined: Jul 2020
Posts: 28
My ride is a 2011 Restricted with MFT refreshed to the 3.2.2. Throughout the course of recent days I've seen the red, yellow and green rules that used to appear in the back camera show are done appearing. All I get is the crude video from the camera with no overlay.
192.168.100.1 192.168.1.1
192.168.100.1 192.168.1.1
Last edited by fdazim; Jul 8, 2023 at 01:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post