When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When shut the loading door has a 1inch gap at from and no gap at the back. The lugs just about enter the locators. The rollers are all new and seem to be adjusted as far as they can but the door seems too far back. The pins line and the locking works fine. Is there any other way of moving the door forward that I'm missing? This is the front towards the cab This is the back of the loading door
Mk7 loading door
