Can't locate correct wiring diagrams for the windshield washer pump from switch. Looking for locations and pin outs for all relays that internet system for general timer module andgeneral electronic module.
Clunk in front right - recently replace upper and lower control arms - any ideas?
Note 5 ltr V8 any specific problems to look for?

 

Clunk - could be out of alignment (from replacing parts), or bad 4 wheel hub, or bad cv joint, or bent rim, or unbalanced rim, or warped rotor.

 

4x4 or 4x2.. Here's the diagrams...

[IMG]local://upfiles/6756/7058CB4CEF304318BEF04C5B945F28ED.gif[/IMG]

[IMG]local://upfiles/6756/8B56083592B845918DD24ABEFA208C39.gif[/IMG]

[IMG]local://upfiles/6756/04E79A11F35E40C28DE33AA223F2CB26.gif[/IMG]

[IMG]local://upfiles/6756/BB165C269E8C4F51A339261423320201.gif[/IMG]

[IMG]local://upfiles/6756/E4F863F1C6C64178AA2A791B2BB3C509.gif[/IMG]