2016 super duty
Thread Starter
|
Junior Member
Joined: Jun 2018
Posts: 1
2016 super duty
is it true all super duty’s have same wiring harness? Ie. If I changed my manual seat, to an electric seat, will I find power wires under current seat to wire it? Are upfitter switch wires behind dash even if it doesn’t have the upfitters? Thx
Super Moderator
Joined: Jul 2006
Posts: 7,555
Welcome to the site..
The truck has harness connection to add upfitters, but you’d need the upfitter kit that has the upfitter relay box as well.
If it had upfitter switches, they would be stubbed for Customer access behind upfitter relay box.
The seating connection I believe the standard power seat connection was there. It would be an 8 pin light gray connector. Adding power seating would depend on what level of seat/options you were installing.. Memory, Cimate controller ect. wouldn't be a direct swap.
The truck has harness connection to add upfitters, but you’d need the upfitter kit that has the upfitter relay box as well.
If it had upfitter switches, they would be stubbed for Customer access behind upfitter relay box.
The seating connection I believe the standard power seat connection was there. It would be an 8 pin light gray connector. Adding power seating would depend on what level of seat/options you were installing.. Memory, Cimate controller ect. wouldn't be a direct swap.
Thread
Thread Starter
Forum
Replies
Last Post
