On 96 Windstar 3.8L V6, I can't remember how to re-install this bracket and small pulley. Normally I take a picture before removing stuff, but there was no room! For this 3.8L transverse mount, the A/C compressor, pwr steer pump, and alternator are all on the right (towards front bumper) which is where these components were removed.

Picture of these 2 components are attached. Please note the small pulley is not the tension pulley which is on the left and did not have to be removed. I have Ford shop manual and Haynes manual and can't find a diagram or picture. Thanks in advance !