Trouble with 78 400

Thread Tools
 
Search this Thread
 
  #1  
Old 01-24-2019, 04:56 PM
Mightyox's Avatar
Member
Thread Starter
Join Date: Jan 2019
Posts: 43
Default Trouble with 78 400

It's a LTD with new distributor, plugs, wires, carb, ICM, fuel pump and gas tank. It runs until it gets hot then it sputters and stalls. Any help would be great. The smog pump is bypassed.
 
  #2  
Old 01-24-2019, 07:27 PM
Hayapower's Avatar
Super Moderator
Join Date: Jul 2006
Posts: 7,474
Default

Pick up coil was a possibility along with ICM
 
  #3  
Old 01-24-2019, 07:32 PM
Mightyox's Avatar
Member
Thread Starter
Join Date: Jan 2019
Posts: 43
Default

Pick up in the distributor? New coil.
 
  #4  
Old 01-24-2019, 07:38 PM
Hayapower's Avatar
Super Moderator
Join Date: Jul 2006
Posts: 7,474
Default

Generally,, during heating or extended driving the ICM would fail, causing a no start/stall condition. After some cooling, a restart would be possible and likely.
Although more rare or less cause, a pick up coil could would drop out, or loose signal with similar affects..
 
  #5  
Old 01-24-2019, 07:47 PM
Mightyox's Avatar
Member
Thread Starter
Join Date: Jan 2019
Posts: 43
Default

I believe that came new with the distributor unless we are talking about something different.
 
  #6  
Old 01-24-2019, 07:51 PM
Mightyox's Avatar
Member
Thread Starter
Join Date: Jan 2019
Posts: 43
Default

Could it be the EGR?
 
  #7  
Old 01-24-2019, 08:35 PM
Hayapower's Avatar
Super Moderator
Join Date: Jul 2006
Posts: 7,474
Default

Distributor wasn’t mentioned prior,, EGR application shouldn’t be at idle, although easy enough to prove out..
 
  #8  
Old 01-24-2019, 08:39 PM
Mightyox's Avatar
Member
Thread Starter
Join Date: Jan 2019
Posts: 43
Default

How can I test the EGR?
 
  #9  
Old 01-24-2019, 09:18 PM
Hayapower's Avatar
Super Moderator
Join Date: Jul 2006
Posts: 7,474
Default

Unless the EGR is open/bleeding removing the vacuum hose will eliminate EGR application.. The temp doesn’t seem to follow EGR,, So,, hot meaning what?
 
  #10  
Old 01-25-2019, 05:28 AM
Mightyox's Avatar
Member
Thread Starter
Join Date: Jan 2019
Posts: 43
Default

Hot meaning running temp. Could it be the carb is to rich when it gets warm and is flooding it out.
 


Quick Reply: Trouble with 78 400



All times are GMT -5. The time now is 01:25 AM.