1998 Contour fan in-op?
#2
RE: 1998 Contour fan in-op?
You can download an owners manual here.. https://www.fleet.ford.com/maintenan...ls/default.asp
Also check the blower relay, the heater/fan blower resistor...
[IMG]local://upfiles/6756/141554277B1B437CBAEE03A7D6A86BD9.gif[/IMG]
Also check the blower relay, the heater/fan blower resistor...
[IMG]local://upfiles/6756/141554277B1B437CBAEE03A7D6A86BD9.gif[/IMG]
#4
RE: 1998 Contour fan in-op?
I checked the power to the heaterfan motor itself and I am getting power to it. I assume the motor is bad. Does anyone know how to remove it? I do not see any screwson the motorto remove it?
#5
RE: 1998 Contour fan in-op?
Blower Motor
Removal
1. Remove the pushpins for the upper footwell trim panel on the passenger side and remove it.
[IMG]local://upfiles/6756/4402B8F5BDEE4093800488C77CED33A6.jpg[/IMG]
2.Remove the blower motor.
Disconnect the electrical connector.
Lift the securing tab slightly.
Turn the blower motor approx. 30° counterclockwise and remove it.
[IMG]local://upfiles/6756/34119D9712C04B679AAD82B6051FD3D6.jpg[/IMG]
Installation
1. NOTE: Engage the securing tab for the blower motor.
To install, reverse the removal procedure.
[IMG]local://upfiles/6756/96A044B9CBF24C33ACA17865D224679B.jpg[/IMG]
Removal
1. Remove the pushpins for the upper footwell trim panel on the passenger side and remove it.
[IMG]local://upfiles/6756/4402B8F5BDEE4093800488C77CED33A6.jpg[/IMG]
2.Remove the blower motor.
Disconnect the electrical connector.
Lift the securing tab slightly.
Turn the blower motor approx. 30° counterclockwise and remove it.
[IMG]local://upfiles/6756/34119D9712C04B679AAD82B6051FD3D6.jpg[/IMG]
Installation
1. NOTE: Engage the securing tab for the blower motor.
To install, reverse the removal procedure.
[IMG]local://upfiles/6756/96A044B9CBF24C33ACA17865D224679B.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post