Hello. I have a new to me 2001 Crown Victoria Police Interceptor (aka P71) and cannot get the lights to work. The high-beams work when I use the stalk to "flash to pass" and the brake lights and backup lights work, but the headlights, turn signals and hazard lights do not work. I have checked all the fuses I could find (and I can hear a relay switching when I pull the number six fuse), but cannot figure out what else to check.

Thank you in advance for any assistance you are willing to offer.

Robert

 

you may have a bad head light switch,or dimmer assembly, this is on the steering colum. email me back james

 

Thanks. After a day of tracking everything down, I think I have an answer. When North Las Vegas PD pulled their lights and other equipment, they also pulled the LCM. [:@] Yeah, I feel a little silly. The three pigtails were stuffed into the space where the LCM goes. Guess I should have started there first. On the plus side, I did remove all the cut-up wires they left under the dash and once I figured out what the problem was, spent some time removing the adhesive left when they pulled the decals.

Hopefully they still have the LCM and will let me have it.

Robert