2010 Expedition 5.4 MAF sensor +12v a no show
Thread Starter
|
Junior Member
Joined: Feb 2017
Posts: 1
2010 Expedition 5.4 MAF sensor +12v a no show
Purchased 2010 Expedition 5.4 showing maf & air temp error codes, both look to be combined in the one sensor so says the DIY video.
Wires on the harness have been cut and spliced back together right b4 the sensor connector so that's where I took my readings.
I have a good ground (green)
+5vdc (purple)
Everything else 0vdc
Would appreciate a good jumping off point to start rather than the roof..
Thanks
Wires on the harness have been cut and spliced back together right b4 the sensor connector so that's where I took my readings.
I have a good ground (green)
+5vdc (purple)
Everything else 0vdc
Would appreciate a good jumping off point to start rather than the roof..
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
