Power door lock actuator
Thread Starter
|
Member
Joined: Dec 2006
Posts: 47
Power door lock actuator
i Have a 2000 explorer does any one know how to disconnect the front drivers door actuator the rivit is out is there a procedure to disconect the linkage in there cant see in there very well
Super Moderator
Joined: Jul 2006
Posts: 7,555
RE: Power door lock actuator
Removal
[ol][*]Remove the front door trim panel[*]Remove the watershield.[/ol]
To remove the power door lock actuator.
Disconnect the electrical connector.
Drill out the rivet.
Disconnect the actuator rod.
Remove the actuator[*]
[ol][/ol]
[ol][/ol]
Installation
[ol][*]To install, reverse the removal procedure.[*]Use Heavy-Duty Riveter to install the actuator rivet.
[ul][/ul][/ol]
[IMG]local://upfiles/6756/B3A3BD791D8F40FD94046B7CB95DE933.gif[/IMG]
[ol][*]Remove the front door trim panel[*]Remove the watershield.[/ol]
To remove the power door lock actuator.
Disconnect the electrical connector.
Drill out the rivet.
Disconnect the actuator rod.
Remove the actuator[*]
[ol][/ol]
[ol][/ol]
Installation
[ol][*]To install, reverse the removal procedure.[*]Use Heavy-Duty Riveter to install the actuator rivet.
[ul][/ul][/ol]
[IMG]local://upfiles/6756/B3A3BD791D8F40FD94046B7CB95DE933.gif[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
