Need help on king pins
Thread Starter
|
Junior Member
Joined: Mar 2020
Posts: 2
Need help on king pins
Restoring a ‘69 Ford F-100 and changing out my king pins and ran into the hardest ones ever went and bought a 12 ton press and of yet haven’t been able to get them to release any help would be great
Senior Member
Joined: Jun 2010
Posts: 16,558
They can be a stinker. Just about impossible without the press tool. What worked for me,
SOAK IT, SOAK IT SOAK IT , PB Blaster works pretty well. Not supposed to use heat .
Sometimes with the pressure on the King pin , some raps with a good hammer will help, otherwise , soak it
I used a press made by OTC , good tool.
SOAK IT, SOAK IT SOAK IT , PB Blaster works pretty well. Not supposed to use heat .
Sometimes with the pressure on the King pin , some raps with a good hammer will help, otherwise , soak it
I used a press made by OTC , good tool.
Last edited by hanky; Mar 23, 2020 at 05:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post