headgasket!
Thread Starter
Joined: Jun 2006
Posts: 17
headgasket!
What anyone think about me doing a headgasket on a 94 aerostar.... Done one on my friends monte carlo 3.1 but look at were those are and were the aerostars are! well just look'n for some tips from people that have done them before...... Thanks NIck any help or opinions aprectaited!
Senior Member
Joined: Jan 2007
Posts: 2,209
From: Yorkshire, NY
RE: headgasket!
Ain't gonna happen without pulling the engine as there's barely enough room to run plug wires with your paws in there, let alone trying to get tools in there in an upright position. The engine technically comes out from under the body after dropping the front under carriage. However, it is possible to get it pulled out thru the front if you're not the impatient type (Been there! Done that!).And, if you're going to go that far and the van is solid with a good drive train, I would go thru the whole engine while it's out.
Joined: Apr 2007
Posts: 15
RE: headgasket!
Use Common Sense
Date 4/23/2007 2:01:45 PM
Ain't gonna happen without pulling the engine as there's barely enough room to run plug wires with your paws in there, let alone trying to get tools in there in an upright position. The engine technically comes out from under the body after dropping the front under carriage. However, it is possible to get it pulled out thru the front if you're not the impatient type (Been there! Done that!).And, if you're going to go that far and the van is solid with a good drive train, I would go thru the whole engine while it's out.
Thread
Thread Starter
Forum
Replies
Last Post
