having problems with my Generic electronic module, not receiving any power from battery. Everything else checks out... at the moment I have a jumper from cigar lighter fuse to one of the gem fuses and it seems to work fine how I have it, for the most part. This leads time to speculate that there is a short or break on the positive side for the power delivery to the GEM. Anyone have a diagram or know which wires feed electricity to the GEM? My plan is to run my own positive feed from the battery to replace these if they are shorted out.

truck is a 97 expedition 5.4 4WD Eddie Bauer edition.

I have a view of the GEM and inputs on the numbered connector pins, but for some reason all the schematics aren’t showing/corrupt for complete GEM ops..