Stereo removal
#2
RE: Stereo removal
SECTION 415-01: Audio Unit 2005 Expedition/Navigator Workshop Manual
REMOVAL AND INSTALLATION Procedure revision date: 10/28/2005
--------------------------------------------------------------------------------
Audio Unit Printable View (62 KB)
Removal and Installation
CAUTION: On vehicles equipped with a CD6 audio unit, interrupting battery power within 30 seconds of repowering will damage the audio unit. To prevent audio unit damage, do not disconnect the battery (or audio unit), reconnect the battery (or audio unit), and then disconnect it again within 30 seconds.
Vehicles with column shift
Remove the instrument cluster finish panel. For additional information, refer to Section 501-12.
Vehicles with floor shift
Remove the instrument cluster center finish panel. For additional information, refer to Section 501-12.
All vehicles
Remove the screws and grounding plate.
NOTE: Standard audio is shown, others are similar.
Disconnect the audio unit antenna lead-in cable and the audio unit electrical connectors, and remove the audio unit.
To install, reverse the removal procedure.
REMOVAL AND INSTALLATION Procedure revision date: 10/28/2005
--------------------------------------------------------------------------------
Audio Unit Printable View (62 KB)
Removal and Installation
CAUTION: On vehicles equipped with a CD6 audio unit, interrupting battery power within 30 seconds of repowering will damage the audio unit. To prevent audio unit damage, do not disconnect the battery (or audio unit), reconnect the battery (or audio unit), and then disconnect it again within 30 seconds.
Vehicles with column shift
Remove the instrument cluster finish panel. For additional information, refer to Section 501-12.
Vehicles with floor shift
Remove the instrument cluster center finish panel. For additional information, refer to Section 501-12.
All vehicles
Remove the screws and grounding plate.
NOTE: Standard audio is shown, others are similar.
Disconnect the audio unit antenna lead-in cable and the audio unit electrical connectors, and remove the audio unit.
To install, reverse the removal procedure.
Thread
Thread Starter
Forum
Replies
Last Post