Transfer case noise??
Thread Starter
|
Junior Member
Joined: Mar 2011
Posts: 7
Transfer case noise??
Have a 2000 F 250 Super Duty 4wd diesel. There is a noise in the front end when in 4 wd. Plow with the truck. Seems to get worse as I use it. Gets louder when truck turns or goes in reverse. Sounds like a tinging noise or high pitched grinding
Senior Member
Joined: Jun 2010
Posts: 16,670
Do you have the noise if the hubs are unlocked?
Do you have the noise if the hubs are locked and the 4WD disengaged?
Have you checked the CV joints at the front wheels ?
Also ,check the u-joints for the front driveshaft.
Do you have the noise if the hubs are locked and the 4WD disengaged?
Have you checked the CV joints at the front wheels ?
Also ,check the u-joints for the front driveshaft.
Thread Starter
|
Junior Member
Joined: Mar 2011
Posts: 7
No noise if hubs are unlocked. No noise until 4 wd is engaged. Just changed both front wheel bearings. Checked u-joints. Do not seem to be the problem. They are not loose. Noise may be coming from transfer case?
Thread
Thread Starter
Forum
Replies
Last Post
