Idle Problem
Most times a problem like this is caused by a vacuum leak .
Again, most times either a rubber hose might have come off, or a vacuum controlled component is defective..
There are a few procedures we use to locate them and depending on if you want to get involved finding it .
Some causes can be easily corrected and some can get involved and a little expensive.
Again, most times either a rubber hose might have come off, or a vacuum controlled component is defective..
There are a few procedures we use to locate them and depending on if you want to get involved finding it .
Some causes can be easily corrected and some can get involved and a little expensive.
Thread
Thread Starter
Forum
Replies
Last Post



