Hi mount brake light
Thread Starter
|
Senior Member
Joined: Sep 2011
Posts: 767
From: Iowa
Hi mount brake light
Hi gals and guys:
If you have a 2nd generation Ford Contour/Mercury Mystique you will probably have a crumbling cover over your high mount brake light. I found that you can use a high mount brake light of a Geo Metro sedan to replace the original.
Most likely you can splice the wires and use the metro light without any alterations. It pops right into the holes in the package tray and you are done.
I took the brake light apart, removed the wiring harness and bulbs, removed the reflectors and put in the Contour's 5 bulb reflector. There was enough slack in the wire to connect the original connector through a hole into the transplanted reflector.
Here is how it looks.
Attachment 1240
If you have a 2nd generation Ford Contour/Mercury Mystique you will probably have a crumbling cover over your high mount brake light. I found that you can use a high mount brake light of a Geo Metro sedan to replace the original.
Most likely you can splice the wires and use the metro light without any alterations. It pops right into the holes in the package tray and you are done.
I took the brake light apart, removed the wiring harness and bulbs, removed the reflectors and put in the Contour's 5 bulb reflector. There was enough slack in the wire to connect the original connector through a hole into the transplanted reflector.
Here is how it looks.
Attachment 1240
Last edited by bluewind; May 23, 2014 at 03:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
