F 350 Clutch safety switch
Thread Starter
|
Senior Member
Joined: Aug 2013
Posts: 251
From: Bowling Green KY
F 350 Clutch safety switch
1999 F-350, 7.3 Diesel, 6 speed manual, 2WD, Std Cab.
There is a "lollipop" end on the switch connected to the clutch lever. It is the cut off switch to prevent starting with the clutch out.
It seems that the bushing/bearing inside the lollipop is gone.
Is there a replacement bushing available?
Thank you.
Eric
There is a "lollipop" end on the switch connected to the clutch lever. It is the cut off switch to prevent starting with the clutch out.
It seems that the bushing/bearing inside the lollipop is gone.
Is there a replacement bushing available?
Thank you.
Eric
Super Moderator
Joined: Jul 2006
Posts: 7,555
Was part of the switch.
Some of the higher mileage trucks used to damage the drive pin and the retainer wouldn't hold. We used to make a bushing for the eye, and use a thin washer and cotter pin hole drilled in to the retainer grove..
Some of the higher mileage trucks used to damage the drive pin and the retainer wouldn't hold. We used to make a bushing for the eye, and use a thin washer and cotter pin hole drilled in to the retainer grove..
Thread
Thread Starter
Forum
Replies
Last Post
powerstrokecrawford
Ford F-150
1
May 27, 2011 10:42 AM
