Owner
Senior Member
Joined: Jun 2010
Posts: 16,567
Need to know,
where are you measuring that voltage and why are you checking it?
The 5 volts is a reference voltage from the PCM, But don't know where you are taking the reading. There are 3 terminals at the TPS. One should be the 5 volts coming from the PCM, one is a ground and one is the signal to the PCM.
where are you measuring that voltage and why are you checking it?
The 5 volts is a reference voltage from the PCM, But don't know where you are taking the reading. There are 3 terminals at the TPS. One should be the 5 volts coming from the PCM, one is a ground and one is the signal to the PCM.
Thread
Thread Starter
Forum
Replies
Last Post
