2004 Freestar rear lift gate handle
Member
Joined: Nov 2008
Posts: 59
BlackSton3,
If they don't send the email address to me or include it in their post, how am I suppose to get the information to them? This information is not going to be post here, due to a past request. If you have a better way to do it, post your suggestion so the moderators can consider it. Otherwise, it is up to the individual poster if they want to send us their email address or not.
If they don't send the email address to me or include it in their post, how am I suppose to get the information to them? This information is not going to be post here, due to a past request. If you have a better way to do it, post your suggestion so the moderators can consider it. Otherwise, it is up to the individual poster if they want to send us their email address or not.
Member
Joined: Nov 2008
Posts: 59
The Moderator's job is to stop you from being reckless -- even when you insist on doing so.
Member
Joined: Jul 2010
Posts: 98
BlackSton3,
Do you need to information?If so, just shoot me a PM as suggested in post #251 by Hayapower, the forum's Super Moderator. If not, why all the posts? Would a sticky be helpful? Maybe. But the person who gave me the information requested that there be no public posting of this information. I tend to honor any such request. Now if you disagree with that, I'm sorry but that is how it is going to be handled for now.
If members of this forum want to post their email address, that's up to them. After all, posting their email address in no way affects you, does it? I understand the security issue you are concerned about, but I'm pretty sure almost every member here realizes what they are doing by posting their email address. Once again, as post #251 states, they can securely PM me with their email address for the information. Their choice, so let them do what they want. We all get your point by now.
If, in the future, the moderators choose to handle things differently, that will be their choice and we will all abide by their decision. That's part of belonging to a forum, abiding by the rules of the moderators. I guess if a member does not agree with the guidelines of the forum, I'm pretty sure they can leave. Just a guess as I have not yet looked into that. For me, I'm happy to spend my free time forwarding the information given to me in order to help others on this forum. That is, after all, the whole point of this forum. Just my own thoughts though. I guess I could put that as a sticky if you would prefer.
Do you need to information?If so, just shoot me a PM as suggested in post #251 by Hayapower, the forum's Super Moderator. If not, why all the posts? Would a sticky be helpful? Maybe. But the person who gave me the information requested that there be no public posting of this information. I tend to honor any such request. Now if you disagree with that, I'm sorry but that is how it is going to be handled for now.
If members of this forum want to post their email address, that's up to them. After all, posting their email address in no way affects you, does it? I understand the security issue you are concerned about, but I'm pretty sure almost every member here realizes what they are doing by posting their email address. Once again, as post #251 states, they can securely PM me with their email address for the information. Their choice, so let them do what they want. We all get your point by now.
If, in the future, the moderators choose to handle things differently, that will be their choice and we will all abide by their decision. That's part of belonging to a forum, abiding by the rules of the moderators. I guess if a member does not agree with the guidelines of the forum, I'm pretty sure they can leave. Just a guess as I have not yet looked into that. For me, I'm happy to spend my free time forwarding the information given to me in order to help others on this forum. That is, after all, the whole point of this forum. Just my own thoughts though. I guess I could put that as a sticky if you would prefer.
Junior Member
Joined: May 2011
Posts: 18
Hi, I have and 06 freestar that the lock mechanism is stuck on the tailgate and will not lock anymore. I can hear and see the actuator working but I can not figure out thru the small hole what has to move and where. The schematics would be great if somebody has it. Please PM or email at xnetcrash@yahoo.com.
Thank you
Thank you
Junior Member
Joined: May 2011
Posts: 18
liftgate schematics
You have to remove trim panels first. Buy a new actuator and replace it. Mine would not unlock the door and it was closed. The trim panels are attached with clips to the door frame. Gently pul on the edge of the panels and they will snap out. Do the bottom panel first. *Dont pull to hard!* If you see the clips through the trim panel you are pulling to hard. They will tear the trim. I will see if I still have schematics to send to you shortly.
Member
Joined: Nov 2008
Posts: 59
Look, I'm just calling out the stupidity I see when Forum members willingly posting their emails in a public place where they can easily be picked up and be exploited due to the encouragement of other Forum members. Read back through the thread and you will see that members have been encouraged to post their emails publicly.
Then I'm calling out the further recklessness of Mods not shutting it down; end of story. As far as I'm concerned you all can give out your Social Security numbers and Birthdays next.
Whatever.
Junior Member
Joined: Oct 2011
Posts: 4
Look, I'm just calling out the stupidity I see when Forum members willingly posting their emails in a public place where they can easily be picked up and be exploited due to the encouragement of other Forum members. Read back through the thread and you will see that members have been encouraged to post their emails publicly.
Then I'm calling out the further recklessness of Mods not shutting it down; end of story. As far as I'm concerned you all can give out your Social Security numbers and Birthdays next.
Whatever.
[/QUOTE]
My friend you are either bored or Just have no clue if you keep repeating the same thing, we got it, you don't like it, just leave the forum and thank you. I'm pretty sure by now everybody has 2 or more email's to use and one of them is for spam and other things.
Nevertheless I got the schematics and fixed my problem.The mechanism was rusted and no longer moving, a lot of gear oil and grease got it working again.I was lucky, the actuator was still functional. Thank you for the help.
Then I'm calling out the further recklessness of Mods not shutting it down; end of story. As far as I'm concerned you all can give out your Social Security numbers and Birthdays next.
Whatever.
[/QUOTE]My friend you are either bored or Just have no clue if you keep repeating the same thing, we got it, you don't like it, just leave the forum and thank you. I'm pretty sure by now everybody has 2 or more email's to use and one of them is for spam and other things.
Nevertheless I got the schematics and fixed my problem.The mechanism was rusted and no longer moving, a lot of gear oil and grease got it working again.I was lucky, the actuator was still functional. Thank you for the help.
