I have a 87 Ford Ranger 2.9 v6 Automatic I pulled the transmission to replace the seal and now it wont start no fire or no power to the fuel pump. I have done tested the ignion module and the coil and checked all the fuses. can anybody help me on this Please?

 

Did you forget to hook up all the ground wires you disconnected?

 

sounds like some wires pulled loose when you dropped the transmission !

 

Everyone keeps telling me that it sounds like a ground problem But man I have checked everything I am just at my witts end with it . I have found no loose wires hanging down yet.

 

Check for a tripped fuel pump cut-off inertia switch.

I think on a '87 Ford Ranger it's located passenger side kick panel.