Ford Freestyle The new crossover, combining the versatility of an SUV with the compact size and feel of a station wagon.

Flyee pressure regulator no vaccum line attached

Old Nov 30, 2024 | 11:10 PM
  #1  
Tocker247's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2024
Posts: 1
From: PA
Default Flyee pressure regulator no vaccum line attached

I just was recently given a 2005 ford freestyle upon looking at a coil pack for a cylinder 4 missile i noticed there is no vaccum line to the fuel rail pressure regulator. Where should this vaccum line run to and connect to on th

e engine as it's no where to be found as hose wise?

The cylinder 4 misfire just started after I changed tge fuel filter I'm thinking some debris may of been dislodged n may of clogged an injector for cylinder 4 but I rearranged the could as a test for tomorrow's drive to see if by my luck a coil went bad at tge same time. I'll probably try my loud light set on it tomorrow n check all of it. But figure the filter fuel was near black coming out of it.
 

Last edited by Tocker247; Nov 30, 2024 at 11:43 PM. Reason: Additional information
Old Dec 1, 2024 | 02:52 PM
  #2  
hanky's Avatar
Senior Member
Joined: Jun 2010
Posts: 16,670
Default

You need to be careful with Fords concerning misfires.

If there is an ign system problem , the PCM will disable the injector for that cyl possibly sending you on a wild goose chase..

The better thing to consider would be to replace the fuel filter again and see what comes out of the filter .

What engine is in your vehicle. There is a question of possibly a fuel pressure sensor. Can you supply the engine code from the vehicle sticker on the driver's side door?
 

Last edited by hanky; Dec 1, 2024 at 04:01 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2000 Ranger
Ford Ranger
3
Aug 14, 2024 08:04 PM
hsbc05
General Tech
2
Jul 11, 2019 04:21 PM
crosley
Ford Econoline E Series
6
Jul 4, 2018 06:57 AM
MossyOak10
Ford Taurus
1
May 18, 2015 04:15 AM
snowballexpress
Ford Econoline E Series
0
Jun 13, 2011 11:02 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:53 AM.